OURS PRODUCTS

Model S11-P


Open Frame Gate with a rising stem design and pedestal mounted actuator.

The most common configuration encountered when above ground (or floor) installation of the operating mechanism is practicable. 

Operating forces of the gate are transmitted to the structure (floor).  Pedestal mounting brackets are available for open top situations.

The rising stem configuration allows personnel to see the position of the gate at all times.  The rising stem is protected by a clear, graduated  PVC tube that is  easily removable for periodic stem greasing.

No wear part of the operating system finds itself submerged, keeping them away from aggressive media. Maintenance is therefore minimal and completely performed from the operating floor, eliminating the need for personnel exposure to dangerous confined spaces. 

ACTUATOR OPTIONS

Handweel

S11-P1: Handweel

Most commonly used. Available for sizes up to 36" (900mm)

Gearbox and Crank

S11-P2: Gearbox and Crank

Available for all gate sizes and required for 42" (1050) and 48” (1200mm) sizes.  Gearbox ratio according to gate size.  1:1 ratio for gates sizes up to 36” (900mm) and 2:1 ratio for 42" (1050mm) and 48” (1200mm) size.

Gearbox and Handwheel

S11-P3: Gearbox and Handwheel

Available for all gate sizes and required for 42" (1050) and 48” (1200mm) sizes.  Gearbox ratio according to gate size.  1:1 ratio for gates sizes up to 36” (900mm) and 2:1 ratio for 42" (1050) and 48” (1200mm) sizes.  Handwheel diameter 24” for all sizes.

Electric Motor Actuator

S11-P4: Electric Motor Actuator

Available for all gate sizes in two main brands, Rotork and Auma according to customer’s preference.