OURS PRODUCTS

Model S22-Y


Self-Contained Frame Gate with a non-rising stem design and actuator directly mounted on the top section of the frame (yoke).

This configuration is useful in situations where very limited installation height is desired and the overall vertical dimension must be reduced

The overall outside height (H) of the gate is fixed for each size to allow for full opening.

ACTUATOR OPTIONS

Handweel

S22-Y1: Handweel

Most commonly used. Available for sizes up to 36" (900mm)

Gearbox and Crank

S22-Y2: Gearbox and Crank

Available for all gate sizes and required for 42" (1050) and 48” (1200mm) sizes.  Gearbox ratio according to gate size.  1:1 ratio for gates sizes up to 36” (900mm) and 2:1 ratio for 42" (1050mm) and 48” (1200mm) size.

Gearbox and Handwheel

S22-Y3: Gearbox and Handwheel

Available for all gate sizes and required for 42" (1050) and 48” (1200mm) sizes.  Gearbox ratio according to gate size.  1:1 ratio for gates sizes up to 36” (900mm) and 2:1 ratio for 42" (1050) and 48” (1200mm) sizes.  Handwheel diameter 24” for all sizes.

Electric Motor Actuator

S22-Y4: Electric Motor Actuator

Available for all gate sizes in two main brands, Rotork and Auma according to customer’s preference.